300KW 400V resistive AC load bank For Generator Testing

Keyword:

Product Introduction

The Rata 300KW 400V resistive AC load bank offers these core advantages:

This load bank adopts an advanced control system and high-quality resistive components, supporting multi-level load adjustment from 1kW to 300kW with a minimum step resolution of 1kW.
The device supports not only local manual control, but also is equipped with an intelligent control system based on Siemens PLC, enabling remote automated testing via PC software.
Built with a robust cold-rolled steel shell and IP54 outdoor protection design, it can operate stably under various complex working conditions within a wide temperature range of -20°C to +50°C and at altitudes below 2500 meters.

Key Features And Advantages

(1)Precise load control and multi-step regulation;

(2)Excellent heat dissipation and protection design;

(3)High-quality resistive components;

(4)Intelligent dual control system;

(5)Rugged and durable structural design;

Main Parameters

Model No.RTES300L
Country of originChina
Rated testing voltage400Vac
Control voltage (Auxiliary power supply)230Vac
Frequency50Hz.
Phases & Wires3P4W
Load step resolution1kW
Active load steps (kW)1kW+2kW+2kW+5kW+10kW+10kW+20kW+50kW+100kW*2
Estimated Width*Depth*Height(mm)1600*1350*1250mm (there might be 150mm-200mm difference)
Fans Nos.& Airflow volume1* 20000CFM/H
Estimated Weight (kg)560kgs
Other information
Voltage Tolerance (Short Term Operation)+5%
Load Element Tolerance≤+2.5%
Load ConnectionsCopper busbars
ProtectionThermal emergency cut out
 Air flow switch
 Fan overload protection
 Emergency stop
 Ground lead
Airflow directionHorizontal air forced cooling
Fan typeAirfoil axial fan
Load switching contactor typeAC contactors
Rated maximum/minimum ambient temp. operation+50°C / -20°C
Altitude rating≤2500 [m.a.s.l]
Control chamber IP ratingIP 54 outdoor
Enclosure materialCold rolled steel plate with painting.
Enclosure colorRAL 7035
PortabilityForklift holes
CertificatesISO9001:2015,ISO14001:2015,ISO45001:2018,CE
Duty cycleContinuous
Resistor 
Resistor materialfinned resistor, 8020 Ni-Cr alloy
Stainless steel tubefilled with magnesium oxide powder
Insulation impedanceDC1000V 20MΩ above
Insulation Test voltage2000 Vac for 1min
Withstand temperature800-1000℃
Resistance error1.5%~± 3%

 

CONSULT

NOW


If you have any suggestions or feedback on our company, please fill in the relevant information on this page and submit it. A staff member will contact you in time, or please call us directly.

rata@rata.top

Inquiry