SILV-1000LT Resistive AC Load Bank For Generator or Power Testing
Keyword:
Product Introduction
The Rata SILV-1000LT three-phase resistive load bank is a cost-effective professional load simulation device integrating 1000kW ultra-high power, 10kW coarse-grained control, industrial-grade heat dissipation and multi-layer safety protection with vertical compact design.
It is widely used for performance testing and verification of industrial power supplies including large generators, UPS systems and transformers.
Main Parameters
| Model No. | SIL-V-1000L |
| Country of origin | China |
| Max capacity | 1000kW |
| Rated testing voltage | 400Vac |
| Frequency | 50Hz. |
| Phases | 3 |
| Wire(Star connection) | 4 |
| Load step resolution | 1 kW |
| Load step (kW) | 1+2+2+5+10+10+20+60+100+200*4 |
| Voltage Tolerance (Short Term Operation) | +5% |
| Load Element Tolerance | ± 6% |
| Insulation Test | 500Vac |
| Load Connections | Copper busbars |
| Protection | Thermal emergency cut out |
| Air-flow switch | |
| Fan overload protection | |
| Emergency stop | |
| ACH-Schneider EVS 2000A, # Isolator | |
| Control power | From internal main's load circuit |
| Cooling method | Air forced cooling |
| Airflow volume(Approx. CMM) | 50m3/kW/ h |
| Airflow direction | Horizonts |
| Load switching/contactor type | 3 pole AC contactors |
| Rated maximum ambient temp. operation | +60°C / +122°F |
| Rated minimum ambient temp. operation | -20°C/-4°F |
| Altitude rating | <2000m [m.a.s.l.] |
| Control chamber IP rating | IP 84 |
| Portability | 2 folkift holes |
| Enclosure dimentions | |
| Length(mm) | 2230 |
| Depth(mm) | 1430 |
| Height(mm) | 2068 |
| Weight(KG) | 1500 |
| Load bank control system | |
| Manual control | Push buttons |
| Remote control | Upper level PO based software |
| Communication | Modbus TCP |
| Test voltage(3 phases) | Power derating with lower voltage applied. |
| 400V | 1000 kW |
| 380V | 900 kW |
CONSULT
NOW
If you have any suggestions or feedback on our company, please fill in the relevant information on this page and submit it. A staff member will contact you in time, or please call us directly.